Free shipping on orders above $40

Filter
$35.00 $59.00

Universal Dental Restorative Material - Advanced Nano Technology **Compare to TPH 3, Point 4, Herculite XRV, Filtek Z100 & Z250 

 *APRIL SPEICAL BUY 6 GET 2 FREE*


ProFil™, is a new micro hybrid composite material for use in both anterior and posterior restorations. 
ProFil™ composite resin is the perfect combination of simplicity and exceptional esthetics.

Features
• High polishability 
• Non sticky formula 
• Optimal balance of physical properties 
• Light cured, radiopaque & color stable 
• Low polymerization shrinkage 
• Fast placement technique, easy to apply & sculpt 
• High strength & wear resistance 
• Available in 14 shades

Physical Properties 
ProFil™, a micro hybrid composite has outstanding physical properties that provide excellent wear resistance. 
Sensitivity to ambient light Above 100 sec. 
Weight of total inorganic filler 78% 
Volume of total inorganic filler 59% 
Depth of cure > 1.5 mm 
Compressive strength > 230 MPa 
Flexural Strength > 120MPa 
Water Absorption < 40 µg / Щ 
Solubility < 7.5 µg / Щ

$35.00 $49.00
$35.00 $49.00

Flowable Restorative Material - NEW Economy kit - 4x1gr syringes (A1, A2, A3 & A3.5) COMPARES TO: Revolution by Kerr™ Flow is a visible-light activated, radiopaque, flowable composite. 
The excellent flowable consistency characteristics makes ProFil™ Flow an ideal composite for filling cavities. ProFil™ Flow is available in more than 4 shades.

Features
• Excellent esthetic properties 
• No oozing or slumping 
• Perfect for minimal invasive restorations 
• Low Viscosity 
• Maximum versatility 
• High polish retention & stable color match 
• Long term fluoride release 
• Low shrinkage 
• Indications 
• Class III, Class V, Smaller Class IV restorations 
• Base/liner in Class I & Class II restorations 
• Repair of resin, porcelain and acrylic temporary materials 
• Pit & Fissure sealant 
• Restoration of minimally invasive cavity preparations 
• Undercut blockout

Physical Properties 
ProFil™, a micro hybrid composite has outstanding physical properties that provide excellent wear resistance. 
Sensitivity to ambient light Above 100 sec. 
Weight of total inorganic filler 78% 
Volume of total inorganic filler 59% 
Depth of cure > 1.5 mm 
Compressive strength > 230 MPa 
Flexural Strength > 120MPa 
Water Absorption < 40 µg / Щ 
Solubility < 7.5 µg / Щ

$79.00 $110.00
$79.00 $110.00

Light-Cure Self Adhesive Flowable Composite
ProFil™ Flow SE is a light cure self-etching, self-adhesive, radiopaque, flowable composite. Combining  3 in one ProFil Flow SE features the  benefits of adhesive and restorative technology thus simplifying direct restorative procedures. With this flowable dental composite there is no need to bond separately, reducing steps and saving time.
ProFil Flow SE is faster, easier, safer and is the ideal restorative material for pediatric patients.

Features
• Ready for use
• Etching, bonding and filling in one step
• Does not open dentin tubules
• Radiopaque
• Esthetic
• Increases profitability
• Ideal for pediatric patients

 

Properties
Inorganic filler particle size (d50 - d50)
0.02 - 2.3μm
Volume of inorganic fillers ca.
43%-vol.
Working time (full operating light)
≥01:00 min.
Recommended thickness of layers
≤ 2 mm
Recommended curing time (LED-/ Halogen lamp)
≥ 20 sec.
Depth of cure (20s curing time)
≥ 2 mm
Flexural strength ( = transverse strength)
≥ 90 MPa
Radiopacity
≥160% Al
Adhesion to enamel
≥ 3 MPa
Compressive strength
≥ 260 MPa
Water solubility
≤3 μg/mm3
Flexural modulus (= transverse modulus)
≥ 4 GPa
$79.00 $110.00
$79.00 $110.00

Dual Cure Bulk Fill Composite
ProFil™ BULK is a dual cure dental restorative composite designed for direct restorations. It is suitable for bulk fill
technique in the posterior region and can be applied in an unlimited layer thickness.

Features
• Unlimited depth of cure
• Dual curing mechanism
• Compatible with all methacrylate-based dental bonding agents
• Superior compressive strength
• Utilization of intercalated and exfoliated nano-composite technology
• Easy-to-use and apply using an industry standard, auto-mix dispensing system. Saves time and provides a
consistent, homogeneous mix

 

Compressive Strength 250 MPa
Linear Shrinkage 1.2%
Compatible with halogen light Yes
Compatible with Plasma ark light lamp Yes
Compatible with LED Yes
Depth of Cure Irradiation by LED – for 20 sec. 8.0 mm
Depth of Cure Irradiation by Halogen light – for 20 sec 8.0 mm
Working Time 1.5 - 3.5 min
Setting Time 2.5 - 4.5 min
Average Filler Concentration (by weight) 60 wt%
Shelf Life 2 Years